NeoWine has implemented a secure IoT system using Mobius, an open source based IoT platform.

NeoWine has implemented a secure IoT system using Mobius, an open source based IoT platform.
The Mobius IoT Platform is on Github. It is an open source system based on OM2M.
https://github.com/IoTKETI/Mobius


We have fixed some errors in the open software and implemented the demo system.

In recent years, California has changed its law so that it can only sell if IoT is equipped with the right security.
... Brown signed the bill, SB 327, on Friday. The law mandates that an Internet-connected, or "smart," device ensures the gadget has "reasonable" security features that "protect the device and any information contained therein from unauthorized access, destruction, use, modification, or disclosure. " ...
NeoWine is using the related Mobius IoT Platform and Edge device and related Android App using DORCA3RIM. .
If you purchase DORCA3RIM after NDA, you can download some source code. The total platform usage cost is under discussion.
DORCA3 is equipped with PUF, RSA, ECC, AES, SHA, Unique serial and related key management system in 24pin QFN package of 4x4mm.
Technical support for DORCA3RIM is available in the US and related products are available on eBay and Amazon

ebay link

Amazon link

https://www.youtube.com/watch?v=4dnUTZlXG-U
======

This may be the IoT quality method you want. 

This system consists of IoT server IDC, IoT platform, IoT edge device, IoT nCube, router, mobile phone, and mobile app. IoT edge device is implemented as a raspberry pie or arduino. Think of the IoT platform provided by AWS or Azure as an open source. Because this platform is not commercial software, it is less mature. This source can be open to co-developers who can help us. 

YouTube's video is a demo of connecting a phone and an IoT edge device to an IoT platform. This platform was built by modifying bugs in open-source software called Mobius. LED control on-off, temperature humidity sensor input to the phone can be sent via mobile phone to Arduino or Rpi.

In the middle, it implemented a device called nCube for IoT terminals as a raspberry wave. The server platform was typically installed on lower-cost IDC. Arduino typically uses a separate security module called DORCA3RIM because it cannot operate asymmetric and symmetric keys.

DORCA3RIM will be available on eBay in a few days. If operated on the Rpi, it can be attached without soldering. This means that the module can be manually inserted into the GPIB port to operate.
===






이 시스템이 당신이 원하는 IoT securiity  방법이 될지도 모르겠습니다. 


상용 목적의 AWS 또는 Azure에서는 IoT 서비스가 유료이고 소스가 오픈되어 있지 않으며 편집할 수 없습니다. 그런데 우리가 제공하는 IoT 플랫폼은 오픈소스로 구현한 플랫폼 이라고 생각할 수 있습니다. 그런데 이 IoT 플랫폼은 상용 소프트웨어가 아니기 때문에 플랫폼 소포트웨어의 완성도는 낮습니다. 이 소스 코드는 DORCA3RIM 을 구입하고 우리에 도움을 줄수 있는 공동 개발자에 대해서는 개방될 수 있습니다. 

이 시스템은 IoT 서버 컴퓨터, IoT 플랫폼 소프트웨어, IoT edge device, IoT nCube, router, Mobile Phone, Mobile App 으로 구성되어 있습니다. IoT edge device 는 Raspberry Pi  또는 Arduino 로 구현합니다. 일부 소프트웨어의 FAE 서비스는 유료입니다. 

유튜브의 동영상은 IoT 플랫폼에 전화기와 IoT 에지 장치를 연결한 것의 데모 영상입니다. 이 플랫폼은 모비우스라고 하는 오픈소스 코드의 소프트웨어 버그를 수정해서 만들었습니다. 휴대폰을 통해 Arduino 또는 Rpi에 연결된 LED 컨트롤 온오프, 온도 습도 센서 입력을 폰으로 제어 할 수 있습니다.

중간에 nCube 라는 IoT 단말기를 위한 장치를 라즈베리파로 구현 했습니다. 서버 플랫폼은 일반적으로 저렴한 IDC에 설치되었습니다. 일반적으로 Arduino는 비대칭키와 대칭키를 작동할 수 없기 때문에 DORCA3RIM이라는 별도의 보안 모듈을 사용합니다.우리는 Rpi 또한 우려할 만한 수준의 보안이기 때문에 이 보안모듈을 사용해서 IoT 를 구현하는 것을 추천합니다. 

DORCA3RIM은 몇일 내에 eBay에서 구입 가능합니다. Rpi에서 작동할 경우 납땜 없이 부착할 수 있습니다. 즉, 모듈을 GPIO 포트에 손으로 직접 삽입해서 작동시킬 수 있습니다. 




Comments

Popular posts from this blog

DALPU, the NEOWINE HSM for PC, Phone, Linux, Raspberry Pi

Neowine developed a software copy protection device for Raspberry Pi software engineers

Join the DIY Bitcoin hardware wallet.